FIXEMHOT INFORMATION
How to apply - Overview
Heat Press Temperature, Presure and etc. in order to apply iron on products
Press Condition
1. Material: Rhinestones, rhinestuds, nailheads, all studs only except for ironon-epoxy products
- Fabric: Cotton, Rayon, CVC, Poly for Knitwear
- Please take out motif tape right after heat pressing - hot peeling
| FRONT SIDE | BACK SIDE(Optional choice) | |
| PRESSURE (kg) | 2.8~3.2 | 2.8~3.2 |
| TEMPERATURE (℃) | 150~170 | 150~170 |
| TIME (seconds) | 6 | 4 |
2. Material: Rhinestones, rhinestuds, nailheads, all studs only except for ironon-epoxy products
- Fabric: Denim or other thick fabric like denim
- Please take out motif tape right after heat pressing - hot peeling
| FRONT SIDE | BACK SIDE | |
| PRESSURE (kg) | 3.0~3.5 | 3.0~3.2 |
| TEMPERATURE (℃) | 180 | 150~180 |
| TIME (seconds) | 10 | 7~10 |
3. All Ironon epoxy products
- Fabric: Cotton, Rayon, CVC, Poly for Knitwear, as well as denim
- Please take out motif tape right after heat pressing - hot peeling
| FRONT SIDE | BACK SIDE | |
| PRESSURE (kg) | Not effective | 2.8~3.0 |
| TEMPERATURE (℃) | Not effective | 150~170 |
| TIME (seconds) | Not effective | 8~15 |
Additional Information
- Take projecting buttons, zippers and other thick sections into consideration!
- Thin fabrics(organza)do not absorb the adhesive well.
- Always allow the carrier foil to cool off completely before removing it!
- If impressions have already been caused by foil, brushing, steaming or applying the heat press once more, regenerates the fabric structure